Home » Posts tagged 'bathroom remodelers'
Tag Archives: bathroom remodelers
The bathroom is the most used room in the house, so it’s important to make sure it is a comfortable place. Whether you are renovating your entire home or just replacing the toilet, you’ll find plenty of options to consider. But before you go out and spend tons of money, there are a few things you need to know.
The cost of a full Bathroom Remodeling can vary depending on the scope and quality of the work. The materials used, the fixtures, and the amount of plumbing required also determine the price.
Generally, a mid-range bathroom remodels costs around $30,000 to $35,000. For an upscale remodel, the cost can go up to around $60,000. Adding amenities like a new shower or tub and lighting can add to the total price.
Homeowners should consider how much money they have to spend on the project before starting. This should be based on a budget that includes contingencies. If the cost of the project is more than anticipated, homeowners can reduce the cost of the remodel by removing items themselves.
Plumbing can be costly, so make sure you hire a professional. A plumber can charge from $200 to $45 per hour. They will remove the old fixtures and install the new ones.
Upgrading your showerhead and bathtub can be a great way to save on utility bills. Changing the fixtures in a bathroom can also change the overall look. You can buy fixtures online or at home improvement stores.
The average cost of a half-bath remodel is between $1,500 and $4,000. These rooms are less expensive than full-baths. However, the number of fixtures increases the cost.
A half-bath can be either a powder room or a bathroom. Powder rooms are small, often off the entryway to the house, and contain a toilet. They are traditionally located outside of the kitchen and are used by family members and guests.
Half-baths are typically not tiled. They are constructed of wallboard and absorb liquid. Mold grows on these walls and requires removal. Water issues should be addressed before construction begins.
A half-bath can use almost any flooring type. Tiled floors, hydronic heat flooring, and vinyl 2 flooring are all options. In addition, there are other materials that can be used such as natural stone and polished granite.
Most bathrooms use tile for its water-resistant qualities. Consider installing a new water heater if you opt for a tub or shower. Using these newer models, you can save money on electricity and gas bills.
Remodeling a bathroom can be a wise investment. It can add convenience and increase the value of your home. However, the return on investment (ROI) of a bathroom remodel varies depending on the type of remodel and the current housing market. Here are some helpful tips and statistics to help you calculate the ROI of a bathroom remodel.
According to Remodeling Magazine, the average bathroom remodel costs around $10,000. This is a good investment, but the cost can vary by region. As a rule, professional labor makes up roughly 35 percent of the overall cost. You may need to hire a plumber to handle plumbing issues.
The average ROI of a midrange bathroom remodel in the Minneapolis area is a healthy 51.4 percent. This is higher than the ROI of an upscale bathroom remodel.
A complete, 6-by-8-foot bathroom includes a ceramic tile surround, solid surface vanity counter, fiberglass tub/shower and new chrome fixtures. Adding a full-sized bathroom can be an expensive project, but can also add significant value to your home.
A bathroom remodel a project that requires a lot of planning. Whether you want to improve the look and feel of your bathroom or if you are looking to add value to your home, there are steps you can take to make the process as efficient as possible.
First, you need to decide on the look and feel you want for your bathroom. Then, you need to determine the type of fixtures you will use. There are several options, including new toilets, showers, sinks, and more. You can even upgrade to a new bathtub if you have one.
Next, you need to find a contractor. This can be done through an online search, or a visit to a big box store. It is a good idea to get quotes from multiple contractors. Once you have a firm estimate, you need to create a checklist. This will help you to stay on track.
There are some basic steps involved in Bath Installation. First, you must know how to set up the drain. There are two types of bases for bathtubs, one that is dedicated to a particular model and the other that is universal. Installation of both types of bases is similar. During the installation process, the bathtub must be leveled and the legs of the tub must be secured to the wall using 2-inch galvanized screws. You should put your foot on the tub’s edge to hold it steady while screwing it to the wall.
Another step is to determine the dimensions of the room. Standard bathtubs measure approximately 5 feet by 30 inches and hold about 50 gallons of water. Luxury tubs, however, may require special installation arrangements. If the tub is larger than the opening of a doorway, it may require the removal of a window or hoisting it through an opening. Furthermore, if you have stairs, built-in enclosures might be a problem. In such cases, a multi-piece surround may be best.
Before starting the installation process, remove the old tub. You will need a pry bar and a piece of caulk to cut it loose. Make sure to hire a helper to help you. One person will lift the front edge of the tub while another will slide 1 x 4 boards underneath and act as skids. Then, you can remove the stringer (the cross-piece that supports the tub’s edge).
If you are not comfortable with installing a new tub, you can call a professional. A plumber has experience in doing this work and will have the proper tools and knowledge to do the job correctly. The plumber will also be able to properly hook up the new fixtures. There are also several basic steps to Bath Installation. Depending on the installation process, you may need to cut a hole in an adjacent wall or go through the floor to access the drain pipes.
Shower installations are another trend. Many home improvement shows feature shower installation as the most popular bathroom upgrade. Many tiny homes have already opted to replace their tubs with showers, as the occupants of these houses are most likely single people and couples who do not have children. If you are considering replacing your bathtub or installing a shower, hire a professional company. They will also help you acquire any necessary permits.
If you are preparing to sell your home, you should have your bath installed. Without a bathtub, it will be difficult to sell your home. Some families will not consider purchasing your home, while others will opt for a bathtub over a shower. The bathtub can also be replaced with a beautiful surround that is easy to clean and seals tightly to the bathtub unit. Soaking in warm water in the tub will relieve any stress or aching muscles, so it’s worth the cost to replace it.
When choosing a professional, you should make sure that the person is experienced in installing bathtubs. Bath installation is a time-consuming process, which is why you should hire someone to do the job. It is important to be prepared for unexpected problems, such as leaks and water damage. The price of the installation can increase depending on the type of bathtub. In addition to the type of bathtub you decide to install, you should make sure that your plumbing is in good condition.
The type of bathing installation you choose will depend on the size of the room you are re-doing. For example, an under-mount installation installs the bathtub beneath the deck material. Most under-mount bathtubs are also compatible with the drop-in installation. If you’re aiming to install a freestanding bathtub, you’ll want to choose an under-mount installation. It is important to keep in mind that a freestanding bathtub is usually the most expensive option.
Next, you’ll need to decide on what material you’d like for your new bathtub. Acrylic and fiberglass tubs are both lightweight and durable, but fiberglass is not the best choice for a bathroom. Acrylic tubs are inexpensive and lightweight but are prone to scratches and color changes. Despite the higher price, acrylic tubs are slightly stronger than fiberglass. So, if you want to save some money, you’d better choose acrylic tubs.